VRLA Battery – Everything You Need to Know About

A Complete Guide to VRLA แบตเตอรี่ – The Valve-Regulated กรดตะกั่ว Battery Technology

1. What Does VRLA Mean?

จริง stands for Valve-Regulated Lead-Acid battery. It is a sealed type of lead-acid battery that uses a pressure-regulating valve system to control internal gas buildup.

Key features:

• Sealed construction: The electrolyte is immobilized—either absorbed in a glass fiber separator (AGM type) or suspended in a silica-based gel (GEL type).

• Valve control: A pressure-sensitive safety valve on top opens to release excess gas (oxygen and hydrogen) during overpressure conditions, preventing an explosion.

• Oxygen recombination cycle: Oxygen produced at the positive plate migrates to the negative plate and reacts with lead to form water, maintaining electrolyte balance without water loss.

This design makes VRLA batteries ไม่ต้องบำรุงรักษา และ spill-proof, กับ no need to add water during their service life.

---

2. VRLA Battery Technology: A Brief History

Before the 1970s, lead-acid batteries required the plates to be submerged in free-flowing sulfuric acid, which led to water loss during charging due to electrolysis.

Key milestones in VRLA technology:

Oxygen Recombination Reaction:

ในระหว่างการชาร์จ, oxygen is generated at the positive plate:

This oxygen diffuses to the negative plate, where it recombines into water, eliminating the need to refill water and ensuring internal pressure control.

Side Reactions:

Despite the recombination mechanism, two side reactions still occur:

1. Hydrogen evolution (at negative plate):
   2H⁺ + 2e⁻ → H₂

2. Grid corrosion (at positive plate):
   Pb + H₂O → PbO₂ + 4H⁺ + 4e⁻

To suppress these, manufacturers use lead-calcium alloy plates, which significantly reduce hydrogen evolution and improve battery life.

---

3. How Does a VRLA Battery Work?

Here’s a simplified schematic diagram of the VRLA battery’s internal working mechanism:

Key elements in the operation:

• The safety valve regulates internal gas pressure.

• O₂ and H₂ are managed through an internal recombination system.

• AGM or GEL holds the electrolyte in place.

• Electrochemical reactions are designed to recycle water internally, making the system sealed and low-maintenance.

---

4. Pros and Cons of VRLA Battery

Comparison with Other Battery Technologies

---

5. Where Are VRLA Batteries Used?

VRLA batteries are used across many sectors, thanks to their reliability and sealed design:

• Uninterruptible Power Supplies (อัพ)

• Telecommunications base stations

• Solar and wind energy storage systems

• Emergency lighting & alarm systems

• Mobility equipment (wheelchairs, scooters)

• Forklifts and floor scrubbers

---

6. ความคิดสุดท้าย: Why Choose VRLA?

VRLA batteries strike an ideal balance between cost, ความน่าเชื่อถือ, and maintenance.

They are:

• ไม่ต้องบำรุงรักษา

• Environmentally friendly

• Easy to install

• Safe and sealed

• Cost-effective for backup and stationary use

Although they may not offer the same cycle life or energy density as lithium-ion batteries, VRLA batteries are trusted worldwide for backup, พื้นที่จัดเก็บ, and off-grid power systems where safety and simplicity matter most.

---

การอ้างอิง & Further Reading:

1. Battery Council International (BCI). Lead-Acid Battery Technical Manual.

2. Sonnenschein Battery Datasheets.

3. Gates Energy Products. เสื่อแก้วดูดซับ (AGM) Technology Overview, 1971.

4. เรา. Department of Energy: Energy Storage Database.

5. IEC 60896-21 & -22: Stationary Lead-Acid Batteries Standards.